/**
 * 根据粮情数据到后台获取打印模板，然后开始渲染数据
 */
builderModel = function (grainData, isPrint) {
    var depotData = grainData.depotData;
    if (!depotData.depotType) {
        depotData.depotType = DepotType.T_01;
    }
    var key = builderModelKey(depotData.depotType, grainData.cable, grainData.cableCir);

    var modelData = CACHE_PRINT_MODEL.get(key);
    if (modelData) {
        return builderModelStep2(modelData, grainData, isPrint);
    }

    //从后台获取报表模板
    $.ajax({
        type: "POST",
        url: "../../basic/grain/build-print-model",
        dataType: "json",
        contentType: "application/json;charset=UTF-8",
        data: JSON.stringify({
            companyId: grainData.companyId,
            cableRule: grainData.cable,
            cableCir: grainData.cableCir,
            depotId: grainData.depotId,
            depotType: depotData.depotType
        }),
        success: function (result) {
            if (result.code != "0000") {
                layer.msg(result.msg);
                return null;
            } else {
                //存放在缓存中
                modelData = result.data;
                CACHE_PRINT_MODEL.set(key, modelData);
                return builderModelStep2(modelData, grainData, isPrint);
            }
        },
        error: function () {
            layer.msg("获取粮情的打印模板失败！！");
        }
    });
};


/**
 * 获取模板后添加数据
 * @param grainData
 * @param isPrint
 */
builderModelStep2 = function (modelData, grainData, isPrint) {
    var attCable = grainData.cable.split("-");
    numZ = attCable[0];
    numY = attCable[1];
    numX = attCable[2];
    var model = modelData.model;

    var depotData = grainData.depotData;
    //替换基础数据
    if (dept) {
        model = model.replace("companyName", dept.name);
    } else {
        model = model.replace("companyName", "智慧粮库");
    }
    model = model.replace("depotName", depotData.name)
        .replace("weather", grainData.weather == null ? "" : grainData.weather)
        .replace("orientation", depotData.orientation == null ? "" : depotData.orientation)
        .replace("checkDate", grainData.receiveDate)
        .replace("remark", grainData.remark == null ? "正常" : grainData.remark)
        .replace("c_max_all", grainData.tempMax)
        .replace("c_min_all", grainData.tempMin)
        .replace("c_ave_all", grainData.tempAve);

    model = model.replace("c_out_ave_all", "");//暂时不用
    model = model.replace("c_in_ave_all", "");//暂时不用

    model = model.replace("c_tIn", grainData.tempIn)
        .replace("c_hIn", grainData.humidityIn)
        .replace("c_tOut", grainData.tempOut)
        .replace("c_hOut", grainData.humidityOut)
        .replace("c_depotType", depotData.depotTypeName)
        .replace("c_storeDate", depotData.storeDate == null ? "" : depotData.storeDate)
        .replace("c_foodLocation", depotData.foodLocation == null ? "" : depotData.foodLocation)
        .replace("c_perImpurity", depotData.perImpurity == null ? "" : depotData.perImpurity)
        .replace("c_storeDate", depotData.storeDate == null ? "" : depotData.storeDate)
        .replace("c_checkUser", grainData.checkUser)
        .replace("c_storeKeeperName", depotData.storeKeeperName == null ? "" : depotData.storeKeeperName)
        .replace("createBillDate", grainData.sysDate);

    //动态数据信息--平方仓
    if (DepotType.T_01 == depotData.depotType) {
        if("ROW" == modelData.modelType){
            model = addPointsRow1(model, grainData, numX);
        }else{
            model = addPoints1(model, grainData, numX);
        }
    }
    //动态数据信息--浅圆仓
    if (DepotType.T_02 == depotData.depotType) {
        model = addPoints4(model, grainData);
    }
    //动态数据信息--油罐
    if (DepotType.T_03 == depotData.depotType) {
        var oilHeight = grainData.oilHeight;
        if (oilHeight) {
            var att = oilHeight.split("-");
            model = model.replace("c_depotHeight", att[1]).replace("c_oilHeight", att[0]);
        } else {
            model = model.replace("c_depotHeight", "#").replace("c_oilHeight", "#");
        }
        model = addPoints4(model, grainData);
    }
    //动态数据信息--立筒仓
    if (DepotType.T_04 == depotData.depotType) {
        model = addPoints4(model, grainData);
    }

    if (!isPrint) return model;
    layer.msg("开始调用打印机……");
    previewA4(model);
    return model;
};

/**
 * 模板缓存KEY的生成
 * @param depotType
 * @param cable
 * @param cableCir
 */
builderModelKey = function (depotType, cable, cableCir) {
    if (cableCir) {
        return depotType + "_" + cable + "_" + cableCir;
    }
    return depotType + "_" + cable;
};

//根据采集点赋值，注意数据库生成的坐标是从0开始的
addPoints1 = function (model, numX) {
    var listPoints = grainData.listPoints;
    var listLays = grainData.listLays;
    var point;
    var key;
    var lay;
    var temp;
    for (var i = 0; i < listPoints.length; i++) {
        point = listPoints[i];
        temp = point.temp;
        lay = listLays[point.z];
        //层最
        if (lay.z <= listLays.length) {
            key = "c_max_" + (lay.z + 1);
            model = model.replace(key, lay.tempMax);
            key = "c_min_" + (lay.z + 1);
            model = model.replace(key, lay.tempMin);
            key = "c_ave_" + (lay.z + 1);
            model = model.replace(key, lay.tempAve);
            key = "c_out_ave_" + (lay.z + 1);
            model = model.replace(key, lay.tempAveOut);
            key = "c_in_ave_" + (lay.z + 1);
            model = model.replace(key, lay.tempAveIn);
        }

        key = "c_" + (point.z + 1) + (point.y + 1) + (point.x + 1);
        if (-100.0 == temp) {
            temp = "备用";
        }
        if (-101.0 == temp) {
            temp = "故障";
        }
        if (temp == lay.tempMax) {
            temp = temp + "*";
        }
        if (temp == lay.tempMin) {
            temp = temp + "#";
        }
        //key = c_z+1 + 1 + numX表示第一列
        if (key == ("c_" + (point.z + 1) + "1" + numX)) {
            temp = "<" + temp + ">";
        }
        model = model.replace(key, temp);
    }
    return model;
};

//横向通风赋值
addPointsRow1 = function (model, grainData,numX) {
    var listPoints = grainData.listPoints;
    var listRows = grainData.listRows;
    var point;
    var key;
    var lay;
    var temp;
    for (var i = 0; i < listRows.length; i++) {
        point = listPoints[i];
        temp = point.temp;
        row = listRows[point.y];
        //行最大
        if (row.y <= listRows.length) {
            key = "c_max_" + (row.z + 1);
            model = model.replace(key, row.tempMax);
            key = "c_min_" + (row.z + 1);
            model = model.replace(key, row.tempMin);
            key = "c_ave_" + (row.z + 1);
            model = model.replace(key, row.tempAve);
        }

        key = "c_" + (point.z + 1) + (point.y + 1) + (point.x + 1);
        if (-100.0 == temp) {
            temp = "备用";
        }
        if (-101.0 == temp) {
            temp = "故障";
        }
        if (temp == lay.tempMax) {
            temp = temp + "*";
        }
        if (temp == lay.tempMin) {
            temp = temp + "#";
        }
        //key = c_z+1 + 1 + numX表示第一列
        if (key == ("c_" + (point.z + 1) + "1" + numX)) {
            temp = "<" + temp + ">";
        }
        model = model.replace(key, temp);
    }
    return model;
};

//筒仓添加采集点和层温度信息
addPoints4 = function (model, grainData) {
    // console.log(grainData);
    var listPoints = grainData.listPoints;
    var listLays = grainData.listLays;
    var point;
    var key;
    var lay;
    var temp;
    for (var i = 0; i < listPoints.length; i++) {
        point = listPoints[i];
        lay = listLays[point.z];
        temp = point.temp;
        //层最
        if (lay.z <= listLays.length) {
            key = "c_max_" + lay.z;
            model = model.replace(key, lay.tempMax);
            key = "c_min_" + lay.z;
            model = model.replace(key, lay.tempMin);
            key = "c_ave_" + lay.z;
            model = model.replace(key, lay.tempAve);
            key = "c_out_ave_" + lay.z;
            model = model.replace(key, lay.tempAveOut);
            key = "c_in_ave_" + lay.z;
            model = model.replace(key, lay.tempAveIn);
        }

        key = "c_" + (point.x + 1) + "_" + (point.y + 1) + "_" + (point.z + 1);
        //判断层高低温
        if (-100.0 == temp) {
            temp = "备用";
        }
        if (-101.0 == temp) {
            temp = "故障";
        }
        if (temp == lay.tempMax) {
            temp = temp + "*";
        }
        if (temp == lay.tempMin) {
            temp = temp + "#";
        }
        model = model.replace(key, temp);
    }
    return model;
};
/**
 * 根据HTML模版打印为A4
 * @param strHtml
 */
previewA4 = function (strHtml) {
    var LODOP = CLODOP;
    LODOP.SET_PRINT_PAGESIZE(1, 0, 0, "A4");
    LODOP.PRINT_INIT("粮情报表");
    LODOP.ADD_PRINT_HTM(30, 40, "180mm", "100%", strHtml);
    //设置默认满张打印
    LODOP.SET_PRINT_MODE("PRINT_PAGE_PERCENT", "Full-Page");
    LODOP.PREVIEW();
};